¨      Another innovative design available from J.E.Fifer is the Stand Alone Bottom Positive Overlap Sealer.

¨      A new and innovative method of sealing  shrink film on automatic form, fill & seal equipment.

¨      Designed to replace problematic static sealing or erratic drag block or wire systems-the Stand Alone Sealer is here!

The Stand Alone Positive Lap Sealer incorporates the following features:

¨      This versatile add on unit can be inserted between the sealer and the tunnel or between the tunnel and the take-away conveyor. .

¨      Used for machines that have static or drag systems, where conversions are not practical.

¨      Fast, the sealer is rated at 200 linear feet per minute and can take packages up to 11 1/2" tall and 20" wide.

¨      Belt speed is adjustable to match line speed.

¨      An optional driven & synchronized upper hold down unit will keep light packages and tall packages in constant contact with the 15" long Stainless Steel band, assuring good and even pressure regardless of speed.  

¨      For customers with heavy or large packages, the upper hold down unit may be omitted for even greater cost savings.

FOR MORE INFORMATION:

Contact:

J.E. Fifer Sheet Metal Fabricators, Inc.

2301 Old Dominion Street

Richmond, VA 23224

Tel: 1-800-541-2415, (804)233-8403

Fax: (804)232-6308